Print From An External Device - Epson PICTUREMATE PM 225 Basics Manual

Print From an External Device

PictureMate can print photos stored on a:
●
PictBridge-enabled digital camera (this page)
●
Bluetooth-enabled device (requires an optional
Bluetooth Photo Print adapter; see the online
User's Guide for information).
Printing From a Digital Camera
You can connect a digital camera that supports
PictBridge printing to PictureMate and use the camera
to control printing.
(Check your camera manual to see if it supports
PictBridge. A cable may not be included with your
camera.)
1
Make sure PictureMate is on but not printing.
2
Make sure there are no memory cards in
PictureMate's slots.
Note: You must remove your memory card or the printer
will read photos from the card, not from a camera.
3
Turn on your camera.
22
4
Connect your camera's USB cable to your camera
and the EXT. I/F port on the back of
PictureMate.
5
Use your camera's controls to select and print
photos on PictureMate. (See your camera manual
for instructions.)
6
When you are finished, disconnect your camera
before inserting a memory card in PictureMate.