Table of Contents
Advertisement
Industry and Agency Standards
Physical Configurations
Weight
Dimensions
Preventive Maintenance
Environment
Operating
Nonoperating
Safety
Operator Manual
B–78
115.4 lbs.
Width:
28.3 inches
Height:
13.0 inches
Depth:
14.4 inches
Depth with paper exit guide assembly:
This printer is designed to eliminate the requirement of scheduled mainte-
nance procedures, such as alignment, adjustment, or lubrication. Preventive
maintenance is limited to periodic cleaning. Dust and paper fibers should be
removed periodically with a soft cloth and brush or a vacuum cleaner. Clean
the printer case with a damp cloth and soapy water. DO NOT use any abrasive
cleaners or solvents, as they will damage the case.
Temperature (Dry Bulb):
Humidity:
10 to 90% noncondensing with a maximum wet bulb
temperature of 82°F (28°C) and a minimum dew point of
36°F (2°C )
Altitude:
To 8,000 ft. (2438 meters)
Temperature:
Boxed:
Unboxed:
Humidity:
Altitude:
Thermal Shock:
Vibration:
Personnel hazard areas have restricted access with appropriate warning labels.
Catastrophic equipment failures are inhibited with protective functions in
major areas of overload potential.
50°F to 104°F (10°C to 40°C)
-40°F to 151°F (-40°C to 66°C)
14°F to 122°F (-10°C to 50°C)
10 to 95% noncondensing
To 10,000 ft. (3048 meters)
61°F (20°C) per hour
Units meet NSTA (National Safe Transit Association)
requirements.
23.4 inches
Advertisement
Table of Contents
