Table of Contents
Advertisement
How to label a configuration slot
• Make sure the printer is Offline.
• Press the Menu key to enter Menu mode.
• Use the Up and Down Arrow keys to get to the Config menu, and then
press Enter.
• Use the Up and Down Arrow keys until the display reads Configura-
tions, then press Enter.
• Use the Up and Down Arrow keys until you see Config n label, where n
is the number of the configuration you want to label (1-10). Press Enter.
• A cursor appears underneath the first letter (C). Use the Up and Down
Arrow keys to scroll to the number or letter you want to use. Repeat for
up to 15 characters, pressing Enter after each letter. You must press
Enter 15 times even if your label is shorter.
• Press Clear or Menu to save it. Now, when you use SAVE or LOAD, this
configuration name appears in the slot you've chosen.
Chapter 3: Printer Menus and the Control Panel
Config Menu ⇒ Configurations
3–59
Advertisement
Table of Contents
