Setting The Run Time Parameters - Epson EQUITY LT-286e User Manual

You cannot include certain tests in a group. The tests that must
run separately include:
category
System Board
Hard Disk
Floppy
Keyboard
Miscellaneous
After you select the test(s) you want to run, you must set the
Run Time Parameters.

Setting the Run Time Parameters

To specify the Run Time Parameters, press F2 to move to the
Run Time Parameters window. DIAG displays default values for
each of the run time parameters.
You can press E
window and return to the submenu of diagnostics tests.
The first: run time parameter defines how long or how many
times to run the test. You see this prompt:
Testing Mode: (T)imebound / (C)ontinuous /
(P)assbound [max = 65535] (T/C/P) ? P
Test
Timer test
Real Time Clock test
Hard Disk Format
Auto Interleave
Media Analysis
Force Bad Tracks
Disk Change Line Test
Scan/ASCII Code Test
Printer Adapter Test:
Comm. Adapter Test
at any time to exit the Run Time Parameters
SC
System Diagnostics 7