Table of Contents
Advertisement
With a PC
2
Setup
After the software is installed, the unit must be connected to the PC and be correctly recognized by the
PC.
Remove the supplied CD-ROM from your PC.
Connect this unit to the AC adaptor
and turn on the unit.
1
Connect this unit to a PC.
The USB function selection screen will appear.
2
Select [PC/RECORDER]
or [SD CARD] then press the
joystick.
This unit is automatically detected by the PC.
When the unit is connected to a PC, its
power cannot be turned off. Disconnect the
USB cable before turning this unit off.
(F 91)
Do not disconnect the USB cable or AC
adaptor while the access lamp is on or access
icon (
or
) appears on the LCD
monitor. Doing so may damage the data on the
HDD or SD card.
The HDD and SD card cannot be accessed
simultaneously.
It may be necessary to reboot the PC after
connecting this unit to it for the first time.
90
LSQT1449
Connection and recognition
Insert the USB connectors as far as they will
go.
Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
About the PC display
When the unit is connected to a PC, it is
recognized as an external drive.
This unit supports only the readout of data
using the PC. The PC cannot write data to the
[HDD]
unit, or erase data from the unit.
Depending on the operating environment of the
PC, the shape of the drive icon and the drive
name will differ.
The icon is displayed in [My Computer
(Computer)].
When accessing the HDD
Windows Vista:
Windows XP:
Windows 2000:
USB cable (supplied)
Drive icons
Hide quick links:
Advertisement
Table of Contents
