Panasonic SDR-H80A Operating Instructions Manual page 83

7
Select the paper size setting on
[PAPER SIZE], then press the
joystick.
[STANDARD]: Size specific to the printer
[4 5 INCH]: L size
[5 7 INCH]: 2L size
[4 6 INCH]: Postcard size
[A4]: A4 size
You cannot set paper sizes not supported on
the printer.
8
Select the layout setting on
[PAGE LAYOUT], then press the
joystick.
[STANDARD]: Layout specific to the printer
[ ]: No frame print
[ ]: Frame print
You cannot set page layouts not supported on
the printer.
9
Select [PRINT]
the joystick.
Exit PictBridge by disconnecting the USB cable
after the pictures have been printed.
When you want to stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is
selected, the number of prints set is canceled
and the screen returns to step 3. If [NO] is
selected, all the settings are kept and the screen
returns to step 3.
Avoid the following operations during printing.
These operations disable proper printing.
Disconnecting the USB cable
Opening the SD card slot cover and
removing the SD card
Switching the mode dial
Turning off the power
Check the settings for the paper size, quality of
print, etc. on the printer.
The sides of pictures recorded in [
may be cut off. Check before printing (print
preview).
When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (Refer to the operating
instructions of the printer for details.)
[YES] and press
0.2 ] mode
When the unit is connected directly to the
printer, the DPOF settings cannot be used.
Connect the printer directly to this unit. Do not
use a USB hub.
83
LSQT1449