Table of Contents
Advertisement
5-4-4 Recoil starter
Attach the recoil starter to the crankcase.
M6 x 18mm Flange bolt : 3pcs.
Tightening torque : 7.0-9.0
5-4-5 Flywheel
Install the flywheel.
M8 x 25 Bolt and washer : 1pce.
8.5D x 28D x 3.2T Washer : 1pce.
Tightening torque : 19.0-21.0 N m
NOTE : Wipe off any oil from the tapered shaft and hole
before assembling.
5-4-6 Air gap adjustment of flywheel and pulsar
coil
Adjust the air gap between flywheel and pulsar coil to
0.5mm with a feeler gauge. Attach the pulsar coil to the
engine.
Air gap : 0.5 mm
N m
70-90
kgf cm
(5.2-6.6
ft lbs)
190-210
kgf cm
(14.0-15.5 ft lbs)
Recoil starter
Flywheel
Flywheel
– 28 –
Pulsar
coil
Hide quick links:
Advertisement
Table of Contents
