Troubleshooting - Edimax Past Ethernet Combo Print Server PS-1216U User Manual

Fast ethernet combo print server user's manual
Hide thumbs Also See for Past Ethernet Combo Print Server PS-1216U:
Table of Contents

Advertisement

8. Troubleshooting

1. The printer cannot be shared in the network.
Check if the printer is a Combo Printer. If it is a Combo printer, please make sure
you have run the "Setup Wizard" and follow the instructions in the manual to
install the printer.
Check if the print server's IP Address settings are in the same subnet with your
computer. For example, if your computer's IP Address is 192.168.1.3, the print
server's IP Address setting should be 192.168.1.x.
Check if the printer you are using is in the "Compatibility List" in Appendix or
contact with your dealer.
2. I am not sure the IP Address settings of my computer.
The following procedures will help you to check the current IP Address setting of
your computer. You can compare if your computer and print server's IP Addresses
are in the same subnet.
1. Click "Start" and select "Run".
2. Type in "cmd" and click "OK".
3.
44

Advertisement

Table of Contents
loading

Table of Contents