Table of Contents
Advertisement
User Guide
Using Your Phone
Placing a Call
When the phone is turned on, check the Signal Strength icon to
see if you are in a Sprint PCS Service Area or authorized
PCS CDMA or analog cellular provider's service area.
1. Open the Flip.
2. Enter the phone number, highlight Call and press
Tip! When dialing long distance, it is not necessary to dial a
"1" before the area code.
3. When you are finished with your call, highlight End Call
and press
page 75), closing the Flip will also end the call.
Roaming With Your Sprint PCS Phone™
Your Sprint PCS Phone™ is dual-band, which means you can use
it to make and receive calls in many places.
•
In any city where Sprint PCS provides service.
•
On other PCS CDMA networks and conventional analog
cellular networks where Sprint PCS has implemented
roaming agreements.
Note: When using your dual-band Sprint PCS Touchpoint Phone™ in
Analog Mode, the handset may feel warm due to the higher transmission
power requirements. This behavior is normal for the analog operation.
10
. If the phone is in Active Flip Mode (see
.
Advertisement
Table of Contents
