Alarm Button; Layout Button; Zoom Button; Ptz Button - Speco CS4 Operation Instruction Manual

Stop: Pressing the

Backward: When in the pause mode, pressing the

Forward: When in the pause mode, pressing the

In the Live Monitoring mode, pressing any playback button enters to the Search mode.

Alarm Button

Pressing the
ALARM

Layout Button

Pressing the
LAYOUT
are: 3x3, 1P7, 1P5, 2x2 and PIP.

Zoom Button

Pressing the
ZOOM
displays showing what area of the screen has been enlarged. You can use the arrow buttons to
move the rectangle to another area.

PTZ Button

Pressing the button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly
PTZ
configured cameras.

Enter Button

The (Enter) button selects a highlighted item or completes an entry that you have made during
system setup. This button is also used to enter the Cameo mode in the Live Monitoring mode or
Search mode (8-ch Model Only).

Esc Button

During menu setup, pressing the

PTZ Control Buttons

While in the PTZ mode, the
buttons are used to Zoom In and Zoom Out, and the
ZOOM
Focus and Far Focus.

Copy Button

Pressing the
COPY
button stops playback and enters the Live Monitoring mode.
button resets the DVR's outputs including the internal buzzer during an alarm.
button toggles between different display formats. The available formats
button zooms the current image on the screen. A PIP with a rectangle temporarily
ESC
buttons are used to save Presets and load a Preset View, the
PRESET
button allows you to copy video clips.
button moves to the next image.
button closes the current menu or setup dialog box.
4- & 8-Channel Digital Video Recorder
button moves to the previous image.
buttons are used for Near
FOCUS
11