Table of Contents
Advertisement
Hardware Installation
2-3.1 CPU Installation
Your SY-7VCA motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Socket 370 CPU
connector on the motherboard.
Mark your CPU Frequency:
your CPU that should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0)
433MHz (66 x 6.5)
FSB 100MHz
500MHz (100 x 5.0)
550MHz (100 x 5.5)
FSB 133MHz
533MHz (133 x 4.0)
600MHz (133 x 4.5)
CPU Mount Procedure:
have purchased separately, follow these instructions.
1.
Lift the socket handle up to a vertical position.
466MHz (66x7.0)
500MHz (66x7.5)
600MHz (100 x 6.0)
650MHz (100 x 6.5)
666MHz (133 x 5.0)
733MHz (133 x 5.5)
To mount the Celeron
23
Record the working frequency of
533MHz (66x8.0)
700MHz (100 x 7.0)
750MHz (100 x 7.5)
800MHz (133 x 6.0)
866MHz (133 x 6.5)
TM
processor that you
SY-7VCA
800MHz (100 x 8.0)
Hide quick links:
Advertisement
Table of Contents
