Changing Menu Options - Sony POWER TRILOGIC SLV-L49 MX Operating Instructions Manual

Changing menu options

1
2
3
4
Menu choices
Initial settings are indicated in bold print.
Menu option
AUTO ANT SELECT
AUTO STEREO*
TUNER AUDIO*
APC
TAPE SELECT
AUTO TAPE SPEED
SHARPNESS
* SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ, L89HF CL/CS/MX/VZ and
X66HF MX only
64
Additional Operations
Press MENU, then select ADVANCED
OPTIONS and press OK.
Press >/. to highlight the option to change, then press OK.
Press >/. to change the setting, then press OK.
To adjust SHARPNESS, press ?// and press OK.
Press MENU to return to the original screen.
Set this option to
•ON if your TV is connected only to VHF/UHF OUT on the
VCR. To play a tape, set the TV to the VCR channel
(channel 3 or 4).
•OFF if your TV is connected to both VHF/UHF OUT and
LINE OUT on the VCR. To play a tape, set the TV to the
VCR input.
•ON to receive stereo programs.
•OFF to reduce noise. The sound changes to monaural.
•MAIN to record the main sound on both hi-fi and normal
audio tracks.
•SAP to record the SAP (Second Audio Program) sound on
both hi-fi and normal audio tracks.
•ON to switch on the APC (Adaptive Picture Control)
function and improve picture quality.
•OFF to switch off APC.
•AUTO when using a T-160 length tape or any tape shorter
than a T-140 length tape.
•180 when using a T-140 or T-180 length tape.
•ON to change the timer recording tape speed automatically
to the EP mode when the remaining tape length becomes
shorter than the recording time. To operate AUTO TAPE
SPEED, set TAPE SELECT correctly.
•OFF to keep the tape speed.
L (Low) through H (High) to adjust the sharpness of the
picture. L to turn off the sharpness control.
ADVANCED OPTIONS
AUTO ANT SELECT ON
AUTO STEREO ON
TUNER AUDIO MAIN
APC ON
TAPE SELECT AUTO
AUTO TAPE SPEED ON
SHARPNESS L
NRETURN
SELECT :
SET : O K
QUIT : MENU
H