Epson 500 Series User Manual page 69

Custom settings (continued)
Option
Bootsequence
Password
Shadow video
BIOS
CPU cache
Non-cocheable Enables or disables a block of memory:
block 1 size
Non-cacheable
block 1 addr
Non-cacheable
block 2 size
Non-cacheable Display the starting address of the second non-cache
block2addr
5-6 Running Setup
Function
Specifies the order in which the checks the
drives when looking for the operating; the
default (C:,A:) loads the operating system from drive
C; if you want to load the operating system from a
diskette, change this setting to A:, C:
Enables or disables password security; select Always to
enable password checking when ever the computer is
turned on or reset; select Setup to enable password
checking only you start the Setup program; If
you enable this option, you then select the change
Password option to specify your password.
Enables or disables shodow RAM for the vtdeo BIOS; if
you enable this feature, the system copies the
contents of its video BIOS into RAM so it can perform
certain operations faster
Enables or disables the 1KB internal memory cache
built into the microprocessor; when the cache is
enabled the system performs most efficiently
you computer automatically caches all system
memory unless you enable this option; some peripheral
devices require non-cacheable memory blocks
Display the starting address the first non-chache
block of memory
Enables a non-cache block of memory;
your computer automatically caches all system
;
memory unless you enable this option; some peripheral
devices require\non-cheable memory blocks
block of memory
s