Network Setup (Auto) - Samsung PN58C550 User Manual

Network Setup (Auto)

Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV's
cable network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU
remote, use the or button to select Setup, and
then press the ENTER button.
3. Use the or button to select Network in the Setup
menu, and then press the ENTER button. The
Network screen appears.
1HWZRUN
1HWZRUN 7\SH
1HWZRUN 6HWXS
1HWZRUN 7HVW
& 0RYH ==(QWHU =$=5HWXUQ
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
appears.
1HWZRUN 6HWXS
,QWHUQHW 3URWRFRO 6HWXS
,3 $GGUHVV
6XEQHW 0DVN
*DWHZD\
'16
'16 6HUYHU
& 0RYH ==(QWHU =$=5HWXUQ
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. When done, press the RETURN
10. Select Network Test to check the Internet connectivity.
11. If the Network Function has not acquired the network
connection values, go to the directions for Manual.
Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
button on your
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
How to set up manually
To set up your TV's cable network connection manually,
:LUHG
follow these steps:
1. Follow Steps 1 through 6 in the "How to set up
2. Set Internet Protocol Setup to Manual.
3. Press the
4. Enter the IP Address, Subnet Mask, Gateway, and
5. When done, press the
6. Select Network Test to check the Internet connectivity.
$XWR
$XWR
button on your remote.
screen.
Network connection values are displayed.
automatically" procedure.
button on your remote to go to the first
entry field.
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
RETURN button on your remote.

English