Bosch FD series Getting Started Manual

3) Select a cycle
4) The unit will
then start
) Open the door
4) Close the
door to start
2) Turn on 3) Select a cycle
FREQUENTLY ASKED
UESTIONS
Run Time
To save energy, this dishwasher has a "Smart Control" that au-
tomatically adjusts the cycle based on soil loads and incoming
water temperature. The "Smart Control" makes decisions that can
cause the cycle time and water usage to adjust at discrete times,
and suddenly change in midcycle. The cycle times listed in the
Use and Care manual are based on normal soil loads and 120°F
incoming water and will vary based on your actual conditions.
When is the Cycle Complete
Dependinq on model you can tell when your unit has completed
the cycle in one of the following ways. Please refer to your Use
and Care manual for complete details
, Countdown Display at"0"
, Clean Light illuminates
, Cycle completion signal sounds (tone adjustable)
• Cycle indicator light that shines on floor goes out
Canceling a Cycle
Be careful of splash-out.
To cancel a cycle in process, press and hold the two buttons
labeled "Cancel Drain" for 3 seconds. Re-start the dishwasher
as normal
• mCancel Drain _ •
To Contact Customer Service
With the dishwasher door open, locate the label on the right side
of the door. There you will find the:
, Model Number
, Serial Number (FD#########)
, Toll Free Customer Service Phone Number