On-Screen Display Options - Gateway FPD1950 User Manual

■ SOURCE
Press to switch between analog or digital source signals or switch between computers
if you have two computers connected to the monitor.
■ MENU
Press to view the OSD. Press again to exit.
■
/LightView
OSD active: Press to select OSD options.
OSD inactive: Press to select a LightView preset viewing mode. Preset modes include
optimized settings for text, movies, or photos in either day or night ambient light
levels.
■
/Contrast/Brightness
OSD active: Press to adjust OSD options.
OSD inactive: Press to open the Contrast/Brightness menu. You can then press
to adjust the brightness, and press
■ AUTO/SELECT
OSD active: Press to make a selection in the OSD.
OSD inactive: Press to automatically optimize the monitor's image position, clock,
and phase.
■
Power/LED
Press this button to turn the monitor off and on.

On-screen display options

Adjusting OSD settings
To adjust the OSD settings:
1
Press the
2
Use the
AUTO/SELECT
3
Use the
4
Press the
AUTO/SELECT
5
When you have finished making all adjustments, press the
button. The OSD menu opens.
MENU
and buttons to highlight a menu or control, then press the
button.
buttons to adjust the control to the desired level.
button to return to the navigation bar on the left of the OSD.
to adjust the contrast.
www.gateway.com
button to exit.
MENU
7