Table of Contents
Advertisement
Using Your Gateway Flat Panel Monitor
4
Make sure that your computer is turned off, then connect the other end of the video
cable to the matching video port on the back of your computer.
5
Connect video inputs (such as from a DVD player, video camera, or receiver) to the
appropriate video jacks on the back of the monitor.
For basic video quality, connect your video device's
■
the corresponding jack on the back of your monitor. (cable not included)
For better video quality, connect your video device's
■
corresponding jack on the back of your monitor. (cable not included)
For best video quality, connect your video device's
■
blue Pb
(cables not included)
6
Plug the power cord into a correctly grounded electrical outlet.
4
Composite video in jack Component green Y jack
, and
) jacks to the corresponding jacks on the back of your monitor.
red Pr
www.gateway.com
Component red Pr jack
S-Video jack
Component blue Pb jack
component video
jack to
composite video in
jack to the
S-Video
(
green Y
,
Hide quick links:
Advertisement
Table of Contents
