Command Port Set Up Page - Panasonic PT-VW430U Operating Instructions Manual

Mail with the contents shown below is sent when an error has occurred.
z
=== Panasonic projector report(ERROR) ===
Projector Type
Serial No
-----
FAN
INTAKE AIR TEMPERATURE
EXHAUST AIR TEMPERATURE
OPTICS MODULE TEMPERATURE
LAMP REMAIN TIME
LAMP STATUS
APERTURE (CONTRAST-SHUTTER)
(Error code 00 40 00 00 00 00 00 08)
Intake air temperature
Exhaust air temperature
Optics module temperature
PROJECTOR RUNTIME
LAMP
LAMP
LAMP
-------- Current status ---------
MAIN VERSION
NETWORK VERSION
LAMP STATUS
INPUT
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
----- Memo -----

Command port set up page

J
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1 Input the port number to be used with command control
2 Setting update button
: PT-VX500
: 000000000
check system -----
:[ 31 degC /
:[ 37 degC /
:[ 39 degC / 102 degF ]
1 H
ECO 500 H
NORMAL 300 H
REMAIN 2400 H
1.00
1.00
LAMP=OFF
NETWORK
OFF
192.168.10.100
04:20:9A:00:00:00
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ FAILED ]
[ OK ]
87 degF ]
98 degF ]
1
2
Network
73
ENGLISH -