Network Install: Hardware
Connect to the Network Port
Note:
®
No Ethernet
with two twisted wire pairs and an RJ45 plug.
□
Turn the printer off.
□
Remove the plug from the Ethernet port (
□
Connect the other end of the cable to the network port.
□
Turn the printer on and wait for the print server's STATUS light (
□
Press the TEST button (
Keep these sheets handy: they contain information you need to set up the printer on your network.
cable is supplied with the printer. Use an Ethernet cable
3
) on the print server. The Network Information configuration sheets print.
1
), then connect your Ethernet cable to the port.
4
2
) to stop blinking.