Regulatory Information; Year 2000 Compliance - Oki C5100n Regulatory And Safety Information Manual

Regulatory Information

E S
®
NERGY TAR
As an E S Partner, Oki Data has determined that this
NERGY TAR
product meets the E
NERGY

Year 2000 Compliance

This product is Year 2000 Compliant. It contains information
technology that accurately processes date and time data between
the years 1999 and 2000, and carries no issue for the September 9,
1999 (9999) programming concern. This product, when used in
combination with products purchased from other manufacturers,
whose products properly exchange data and time information, will
accurately process the date and time.
Federal Communications Commission (FCC)
Declarations of Conformity for 120-Volt
Models
1. Product Identification
Product Name: LED Page Printer C5100
Model No.: N31130A
Product Name: LED Page Printer C5300
Model No.: N31131A
2. Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
4
S guidelines for energy efficiency.
TAR
FCC Radio Frequency Interference
Statements
120-Volt Models
WARNING: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Plug the unit into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television technician
for help.
Note:
It is the responsibility of the user to obtain the required
shielded cable in order to ensure compliance of this
equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data may
void your authority to operate this device.
230/240-Volt Models
WARNING: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
Note: It is the responsibility of the user to obtain the required
shielded cable in order to ensure compliance of this
equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data may
void your authority to operate this device.
English