Specifications; Optional Accessories - Panasonic PT-LW25HU Specification

Specifications

Model PT-LW25H
Power supply
Power consumption
15 mm (0.59 inches) diagonal
Panel size
(16:10 aspect ratio)
LCD panel Display method
1,024,000 (1,280 × 800) x 3,
Pixels
total of 3,072,000 pixels
Lens
Lamp
Screen size (diagonal)
Brightness*³
2,500 lm (lamp power: High)
Center-to-corner uniformity*³
Contrast*³
(full on/full off, lamp power: High, Iris: on)
Resolution 1,280 × 800 pixels
RGB (analog)
Scanning
f : 15.75 kHz, f
H
YP P (YC C )
B R B R
frequency
f : 45.00 kHz, f
H
VIDEO/S-VIDEO
Optical axis shift
Keystone correction range
Installation
COMPUTER IN 1/
S-VIDEO IN
COMPUTER IN 2/ D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)
MONITOR OUT
VIDEO IN
Terminals
AUDIO IN
COMPUTER
AUDIO IN
SERIAL IN
LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
Built-in speaker
Noise level
Cabinet materials
Dimensions (W × H × D)
Weight
Operating environment
Supplied accessories
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software)
*1 When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal. *2 The values given for the recommended lamp replacement cycles
are maximum. The usage environment affects the lamp replacement cycle. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 Input signals that exceed this resolution will be converted to 1,280 x
800 pixels. *5 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels. *6 Power cords available (x 2) for the PT-LW25HEA/LX30HEA/LX26HEA/LX26EA/LX22EA.
Dimensions
Projection distance
unit: meters (feet)
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fi re, malfunction or electric shock.
NOTE ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector's exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as
a backup.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information,
please consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan,
the United States, and other countries and regions or registered trademarks. All other trademarks are the property of
their respective trademark owners.
© 2011 Panasonic Corporation. All rights reserved.
PT-LX30H
*1
297 W (0.47 W in Eco standby mode , 8.6 W in Network standby mode.)
16 mm (0.63 inches) diagonal
(4:3 aspect ratio)
230 W × 1, lamp replacement cycle (lamp power: High, Normal/Eco): 3,000 hours/4,000 hours
3,000 lm (lamp power: High)
3,000:1
(full on/full off, lamp power: High, Iris: on)
*4
f : 15–100 kHz, f : 50–100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
H V
: 60 Hz [480i(525i)] f : 15.63 kHz, f
V H
: 60 Hz [720(750)/60p] f : 37.50 kHz, f
V H
f : 15.75 kHz, f
H
13:1
(The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
RCA pin x 2 (L-R x 1) for VIDEO input
M3 × 1 (L-R x 1)
3.2 cm round shape × 1, output power: 1 W (monaural)
37.0 dB (lamp power: High), 34.1 dB (lamp power: Normal), 29.0 dB (lamp power: Eco)
349 x 105 x 247 mm (13.7" x 4.1" x 9.7") (with legs at shortest position, not including protruding parts)
Approximately 2.99 kg (6.59 lbs)
Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20%-80% (no condensation)
Power cord x 1 *6 , wireless remote control unit, batteries (AAA/R03/LR03 type × 2), VGA cable x 1, filter cover

Optional accessories

unit: mm (inch)
Replacement lamp unit
ET-LAL100
PT-LW25H
(16:10 aspect ratio; throw ratio: 1.5–1.8:1)
Projection distance (L)
Diagonal
image size
min.(wide) max.(tele)
0.76 [30"] 0.9 (3.1) 1.1 (3.7)
1.02 [40"] 1.3 (4.1) 1.5 (5.0)
1.27 [50"] 1.6 (5.2) 1.9 (6.3)
1.52 [60"] 1.9 (6.3) 2.3 (7.5)
1.78 [70"] 2.2 (7.3) 2.7 (8.8)
2.03 [80"] 2.6 (8.4) 3.1 (10.1)
2.29 [90"] 2.9 (9.4) 3.5 (11.3)
2.54 [100"] 3.2 (10.5) 3.8 (12.6)
3.05 [120"] 3.8 (12.6) 4.6 (15.1)
3.81 [150"] 4.8 (15.8) 5.8 (18.9)
5.08 [200"] 6.4 (21.1) 7.7 (25.3)
6.35 [250"] 8.0 (26.3) 9.6 (31.6)
7.62 [300"] 9.6 (31.6) 11.0 (36.1)
*8 There is no guarantee of the lens performance when the projection distance exceeds 11.0 m (36.1 feet).
PT-LX26H
100-240 V AC, 50/60 Hz
Transparent LCD panel (x 3, R/G/B)
786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
1.2x manual zoom, manual focus, F 2.10–2.25, f 19.11-22.94 mm
0.76–7.62 m (30–300 inch)
2,600 lm (lamp power: High)
85%
2,500:1
: 50 Hz [576i(625i)] f : 31.50 kHz, f
V H
: 50 Hz [720(750)/50p] f : 33.75 kHz, f
V H
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], f : 15.63 kHz, f
V H
Vertical: ±30° (±20° when Auto Keystone)
Ceiling/floor, front/rear
D-sub HD 15-pin (female) x 1 (RGB/YP P
B
RCA pin × 1 (Composite VIDEO)
D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
Molded plastic
Replacement filter unit Ceiling mount
bracket for
ET-RFL100
high ceilings*⁷
ET-PKV100H
*7 This product is used together with an optional bracket assembly (sold separately).
PT-LX30H
(4:3 aspect ratio; throw ratio: 1.5–1.8:1)
Height from the
Projection distance (L)
Diagonal
edge of screen to
image size
min.(wide)
center of lens (H)
0.03 (0.09) 0.76 [30"] 0.9 (2.9)
0.04 (0.13) 1.02 [40"] 1.2 (3.9)
0.05 (0.16) 1.27 [50"] 1.5 (4.9)
0.06 (0.19) 1.52 [60"] 1.8 (5.9)
0.07 (0.22) 1.78 [70"] 2.1 (6.9)
0.08 (0.25) 2.03 [80"] 2.4 (7.9)
0.09 (0.28) 2.29 [90"] 2.7 (8.9)
0.10 (0.32) 2.54 [100"] 3.0 (9.9)
0.12 (0.38) 3.05 [120"] 3.6 (11.9)
0.14 (0.47) 3.81 [150"] 4.5 (14.8)
0.19 (0.63) 5.08 [200"] 6.0 (19.8)
0.24 (0.79) 6.35 [250"] 7.6 (24.8)
*8
0.29 (0.95) 7.62 [300"] 9.1 (29.7)
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifi cations table during use. Also, make sure the projector's intake and exhaust
openings are not blocked. Ensure there is suffi cient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fl uctuate. This is not an indication of faulty lamp performance.
PT-LX26
297 W (0.47 W in Eco standby mode
8.6 W in Serial standby mode.)
14 mm (0.55 inches) diagonal (4:3 aspect ratio)
*2
(full on/full off, lamp power: High)
1,024 × 768 pixels *5
: 60 Hz [480p(525p)] f : 31.25 kHz, f
V H
: 60 Hz [1080(1125)/60i] f : 28.13 kHz, f
V H
: 50 Hz [PAL/PAL-N/SECAM]
V
6:1
/YC C /S-VIDEO x 1)
R B R
Approximately 2.90 kg (6.39 lbs)
Software CD-ROM (Logo Transfer Software)
Ceiling mount bracket Bracket assembly
for low ceilings*⁷
ET-PKL100B
ET-PKV100S
PT-LX26H/LX26/LX22
(4:3 aspect ratio; throw ratio: 1.7–2.0:1)
Height from the
Diagonal
edge of screen to
image size
max.(tele)
center of lens (H)
1.1 (3.5) 0.07 (0.21) 0.76 [30"]
1.4 (4.7) 0.09 (0.29) 1.02 [40"]
1.8 (5.9) 0.11 (0.36) 1.27 [50"]
2.2 (7.1) 0.13 (0.43) 1.52 [60"]
2.5 (8.3) 0.15 (0.50) 1.78 [70"]
2.9 (9.5) 0.17 (0.57) 2.03 [80"]
3.3 (10.7) 0.20 (0.64) 2.29 [90"]
3.6 (11.9) 0.22 (0.71) 2.54 [100"]
4.3 (14.3) 0.26 (0.86) 3.05 [120"]
5.4 (17.8) 0.33 (1.07) 3.81 [150"]
7.3 (23.8) 0.44 (1.43) 5.08 [200"]
9.1 (29.8) 0.54 (1.79) 6.35 [250"]
10.9 (35.7) 0.65 (2.14) 7.62 [300"] 10.3 (33.9)
For more information about Panasonic projectors
http://panasonic.net/avc/projector
All information included here is valid as of November 2011.
PT-LX22
*1 , 287 W (0.47 W in Eco standby mode *1 ,
7.1 W in Serial standby mode.)
2,200 lm (lamp power: High)
500:1
: 50 Hz [576p(625p)]
V
: 50 Hz [1080(1125)/50i]
V
—
—
—
—
—
D-Sub/S-VIDEO
conversion cable
ET-ADSV
Height from the
Projection distance (L)
edge of screen to
min.(wide) max.(tele)
center of lens (H)
1.0 (3.3) 1.2 (4.0) 0.07 (0.21)
1.4 (4.5) 1.6 (5.4) 0.09 (0.29)
1.7 (5.6) 2.0 (6.7) 0.11 (0.36)
2.0 (6.7) 2.5 (8.1) 0.13 (0.43)
2.4 (7.8) 2.9 (9.4) 0.15 (0.50)
2.7 (9.0) 3.3 (10.8) 0.17 (0.57)
3.1 (10.1) 3.7 (12.1) 0.20 (0.64)
3.4 (11.2) 4.1 (13.5) 0.22 (0.71)
4.1 (13.5) 4.9 (16.2) 0.26 (0.86)
5.2 (16.9) 6.2 (20.3) 0.33 (1.07)
6.9 (22.6) 8.3 (27.1) 0.44 (1.43)
8.6 (28.2) 10.3 (33.9) 0.54 (1.79)
*8
11.0 (36.1) 0.65 (2.14)
PT-LW25HG1 Printed in Japan.