Sears Craftsman 113.244420 Owner's Manual page 10

assembly
BLADE GUIDES-_
3. Loosen the two cap screws that lock upper blade THRUST \
guides and separate them about 1/8 _. ROLLER _ .
4. Find a Thrust Roller among loose parts and insert _
in upper guido assembly.
5. Loosen two hex head screws in upper guide assem-
bly and slide assembly all of the way back in the CAP
slots.
6. Tighten hex head screws,
SCREWS
7. Loosen lock nut on thrust roller adjustment screw.
8. Back out thrust roller adjustment screw by turning
counter clockwise using 5/32 inch setscrew wrench.
J
JST ROLLER
ADJUSTMENT
SCREW
BLADE GUIDES ___
9. Loosen the two capscrews that lock the lower _____'_//_# _"_
blade guides and separate them about 1/8". _ '
10. Find a Thrust Roller among loose parts and insert in THRUST __
lower guide assembly. ROLLER _
i
11, Loosen lock nut on thrust roller adjustment screw,
12. Back out'thrust roller adjustment screw by turn=ng
counter clockwise using 5/32 inch setscrew wrench.
13. Loosen inner and outer lock nuts on lower guide
assembly adjustment.
14. Turn Iocknuts clockwise and move lower guide
assembly back to the fTame tube.
OUTER
LOCKNU1
LOCi( NUT--
--THRUST
ROLLER
ADJUSTMENT
SCREW
J
p/---FRAME
TUBE
LOCK NUT
10