Sears Craftsman 171.25450 Owner's Manual page 36

NEVER LIFT THEROUTER UPWARDS W HENTHEROUTER IS ONANDTHE ROUTER BITROTATING O RWHEN THEGUIDE
BUSHING IS NEAR TOORTOUCHING THETEMPLATE. THISCANCAUSE DAMAGE T OTHEDOVETAIL FIXTURE; ORLOSS OFCONTROL O F
THEROUTER WHICH CANRESULT I N SERIOUS BODILY INJURY.
19)Afterthecut hasbeenmade, t he workpieces shouldlooklikethoseillustratedin Figure60.
20) Remove theworkpiece and back-upboardsfrom the Dovetail F ixture.
21) Theback-upboardscanbe reusedif thecut portionsof boardsare cut off.AFTER BEING REUSED UNTILTHEY NOLONGER SERVE
THEIR INTENDED F UNCTION, NEWBACK-UP BOARDS MUSTBEMADE.
22) TOCUTCORNER #3 OFTHEPROJECT L EFT SIDE,positionthe top back-up boardon top of the basesothat it lineswith the front of the
baseand abutsthe righttop stop blockas shownin Figure58.
23) Continue asSteps6 through20.
24) TOCUTCORNER # 2 OFTHEPROJECT R IGHT SIDE,positionthe top back-upboardon top of the baseso that it linesup with thefront of
thebaseandabutsthe left top stop blockasshown in figure 61.
TOP BA CK-UP BOARD
Fig. 61 / / TOP OF THE BASE .
f / AU, I ,AR TE , T SU, PBR
.....=. ,./ ., V
,RO, EDT ,ETSIDE . .... //.-. --.-./ 7/ --"t %
"OUTSIDE SURFACE _ SHOULD B EVISIBLE /
ONTHtS SURFACE BEFORE POSITtONING
THE FRONT BACK-UP BOARD
Fig. 62
TOP BACK-UP BOARD,
FRONT B ACK-UP BOARD
DOVETAIL
36