Using The Optional Ac Adapter - Epson PhotoPC 650 User Manual

4. Once the adapter and card are installed in your
computer's PCMCIA slot, you can transfer photos
by simply copying them to your hard drive. To do
so, locate the card's Photo650 folder where your
photos are stored, and drag-and-drop the image
files to your hard disk. See your computer
documentation for more details.
Note:
Be careful not to delete the Photo650 folder on the card. If
you do, you will need to reformat the card when you re-
install it in the camera.

Using the Optional AC Adapter

Using the optional PhotoPC 650 AC adapter (B867 1)
is highly recommended for saving battery power
when you transfer your pictures via the serial cable.
w
Warning:
Use only the adapter designed for the
PhotoPC 650. Using any other adapter may
cause fire, electrical shock, or injury.
Do not alter the plug on the power cable, and do
not use the adapter for any other purpose than
powering your PhotoPC 650.
To ensure the best performance, make sure the
AC adapter is fully plugged into the camera.
5-3
Using Camera Options
Follow these steps to connect the AC adapter.
1. To avoid losing any images or settings, make sure
the camera is finished processing. Then turn off
the camera.
2. Open the connector cover on the side of the
camera and plug the adapter cable into the
DC port.
3. Plug the AC adapter into an electrical outlet.