Erasing The Currently Displayed Picture - Epson PhotoPC 650 User Manual

BACK button to exit the menus.
4. Press the
Viewing the pictures
Using the optional AC adapter is highly
recommended when you play back your pictures on
a TV. See Chapter 5, "Using Camera Options."
Follow these steps to play back your pictures on TV.
1. Make sure the camera and TV (and VCR) are
turned off.
2. Open the camera's card and port cover and
connect the black end of the video cable to the
Video Out port.
3. Connect the yellow end of the cable to the
IN port on the television or VCR.
3-2
Playing Back and Managing Your Pictures
4. Turn on the TV (and VCR), and switch to the
correct video mode.
5. Turn on the camera and slide the monitor switch
to PLAYBACK .
6. Press the
camera. The last picture you took appears on the
TV screen. Press the
forward or backward through your pictures.
7. When you are finished viewing pictures, press the
BACK button, slide the LCD monitor switch to
OFF . Then turn off the camera, and disconnect the
video cable.

Erasing the Currently Displayed Picture

Make sure the LCD monitor switch is set to
PLAYBACK and the image you want to erase is
displayed. Then follow these steps.
1. Hold down the
BACK button.
VIDEO
SELECT button on the back of the
or button to move
FUNCTION button and press the