Epson PhotoPC 650 User Manual page 27

Note:
If you have problems connecting to your COM port, check
your computer's COM port settings and try again. If you
have a high-speed serial board, you may be able to transfer
pictures at 230.4 Kbps. See page 4-5 for instructions on
using EPSON PhotoPC 650 TWAIN to change your Port
speed setting.
Connecting the Camera to a Macintosh
Make sure you have the long serial cable and short
Macintosh adapter that came with your camera.
Before you start, turn off the camera, LCD monitor,
and Macintosh.
1. Connect the small Macintosh adapter cable to
either the modem port or
the back of your Macintosh.
4-3
Getting Photos Into Your Computer
.
printer port on
2.
Line up the arrow on the cable connector with the
port icon on your Macintosh. Then insert the
connector.
Note:
If you share a serial port with another device, make sure
AppleTalk™ is turned off. Your Macintosh may not
recognize the camera if AppleTalk is on. Also, if you
have problems connecting to the printer port, use the
modem port instead.
Connect the long serial cable to the short
Macintosh adapter cable, then tighten the screws.
Macintosh
adapter