Using The Stitch Assist Feature - Epson PhotoPC 3100Z User Manual

Using the stitch assist feature

You can use the PhotoPC 3100Z's stitch assist feature
to help take a series of overlapping pictures that can
be easily combined into a panorama image with the
EPSON Panorama Boutique Light EP included on
your CD-ROM.
This feature allows you to take one or two rows of
overlapping photos.
an example of two rows of overlapping photos
The procedure for taking one level of overlapping
pictures is different from the procedure for taking two
levels of overlapping pictures.
Note:
You cannot use the stitching feature with HyPict or
TIFF files.
For best results, EPSON recommends using a tripod
when using the stitch assist feature.
Taking one row of overlapping photos
To take one row of overlapping photos, take a photo
of the left part of the image first, then turn the camera
to the right to take subsequent photos.
Follow the steps below.
1 2
1. Remove the lens cap, set the dial switch to
turn on the camera.
2. Press the MODE CHANGE button until
STITCHING appears at the top of the LCD monitor.
3. Take a picture.
Immediately after taking the picture, the photo
displays briefly on the screen for confirmation.
During this time, you can erase the photo by
pressing the Delete button.
3 4
, and
2-17
Taking Pictures
2