Altec Lansing INMOTION User Manual page 4

M
IN OTION I
Thank you for purchasing this Altec Lansing product. For generations,
Altec Lansing has been first in audio innovation. Today, our line of
powered speakers has received more performance awards than any
other brand. In all kinds of environments, in every price range, Altec
Lansing offers sound of distinction — giving even the most demanding
customers the audio enjoyment they seek. Just listen to this!
Box Contents
• inMotion iMT1 mobile speaker system
• Universal power supply with international plug set
• 3.5mm stereo cable
• User's guide and quick connect instructions
Compatible Palm Smartphone and PDA:
Works with:
• Palm ® LifeDrive ™
• Palm Treo ™ 650
• Palm Tungsten ™ T5, E2
Placing the Motion
IN
Position the inMotion iMT1 on a level surface, preferably close to you.
Power
Use one of the following two options to power your inMotion iMT1:
AC (Wall outlet) Power
Insert the barrel connector from the power supply into the DC
connector on the back of the inMotion iMT1. After this connection
is made, insert the power supply into a wall outlet.
DC (Battery) Power
Install four AA batteries (not included) into the battery compartments
on the bottom of the inMotion iMT1 (two to each compartment).
Make sure the batteries are installed as illustrated in the battery
compartments.
To Listen to Music
1. Place your Palm device onto the docking connector.
2. Turn on your Palm device.
3. Turn on the inMotion iMT1 by pushing the power button located on
the top of the unit. A blue LED will light around the button when the
power is on.
4. Ensure that the inMotion iMT1 is in music mode by pushing the mode
button until the blue LED with the music icon turns on.
Note: Consult your Palm device's user manual for instructions on how
to play music.
Note: The microphone is muted when the inMotion iMT1 is in music
mode.
Note: To avoid hearing a popping sound when you turn on your
inMotion iMT1, always turn on your audio source first.
To Use as a Speakerphone
1. Place your Palm device onto the docking connector.
2. Turn on your Palm device.
3. Turn on the inMotion iMT1 by pushing the power button located on
the top of the unit. A blue LED will light around the button when the
power is on.
4. Ensure that the inMotion iMT1 is in phone mode by pushing the mode
button until the green LED with the phone icon turns on.
MT1 M
OBILE
Mt1
I
A
UDIO
Note: Consult your Palm device's user manual for instructions on how
to answer a call.
Note: To end a conversation, first hang up using the controls on your
Palm device, then push the mode button
the music icon turns on.
Note: To avoid hearing a popping sound when you turn on your
inMotion iMT1, always turn on your audio source first.
To sync your Palm device with your PC
via the inMotion iMT1
1. Place your Palm device onto the docking connector.
2. Turn on your Palm device.
3. Use a USB cable (not included) to connect the back of the inMotion
iMT1 to the USB port on your PC.
4. Press the sync button
hotsync menu on the Palm device.
Power Off
Turn off the inMotion iMT1 by pushing the power button located on
the top of the unit. The blue LED will turn off.
Auto Shut-down (Standby)
When operating on battery power, the inMotion iMT1 automatically
shuts down (standby) if no audio is detected after three minutes. The
blue LED will turn off.
To restore audio, push the power button located on the top of the
unit. The blue LED will turn on.
Connecting to alternate audio source
Connect an alternate audio source — such as a CD player, MP3 player,
or portable DVD player — to your inMotion iMT1 by plugging one end
of the 3.5mm stereo cable to the line out of your portable device (if it
has one) or to the device's headphone jack. Connect the other end to
the input marked "AUX" on the back of the inMotion iMT1.
Volume
The "+" and "–" buttons on the top of the inMotion iMT1 are the
master volume controls. Press and hold the "+" button to increase the
volume and the "–" button to decrease the volume.
For Additional Bass
The inMotion iMT1 is equipped with a subwoofer jack ("SUB OUT").
This output should only be used to connect an Altec Lansing optional
subwoofer specifically designed to increase the bass output of this
speaker system. Please check www.alteclansing.com for availability
information.
2
until the blue LED with
on top of the inMotion iMT1 or use the