Table of Contents
Advertisement
12. Do not overload the inlet and extension cords as this can result in fire
or electric shock.
13. Be careful not to damage the power cord or plug.
14 Do not allow anything to rest on the power cord. Do not place a cord
where it may be stepped on.
15. Do not replace the video interface cable with a non-shielded cable.
16. Unplug the monitor from the wall outlet and the computer before
cleaning. Use a damp cloth for cleaning.
17. Excessive brightness for long periods may permanently imprint an
image on the screen.
18. To avoid picture distortion or color disturbance, do not put devices
that generate magnetism (such as telephones, televisions, speakers,
or magnetic screwdrivers) near the monitor.
19. When you finish using the monitor, turn it off by pressing the power
button. (Always wait at least five seconds before you turn it back
on.) When the monitor will not be used for a long period of time,
unplug the power cord.
20. Unplug the monitor from the wall outlet and refer servicing to
authorized service personnel under the following conditions:
A. If the power cord or plug is damaged
B.
If the monitor has come into contact with any liquids, such as rain
or spills.
C. If the monitor does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions; improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the product
to normal operation.
D. If the monitor has been dropped or the cabinet or glass faceplate
has been damaged.
E.
If the monitor exhibits a distinct change in performance.
iv
Advertisement
Table of Contents
