Installation - Craftsman 919.165510 Owner's Manual

Permanently lubricated single stage portable
Hide thumbs Also See for 919.165510:
Table of Contents

Advertisement

Available languages

Available languages

HOW TO SET UP YOUR
IMPORTANT: The outlet being used
UNiT
Location
of the Air Compressor
Locate the air compressor
in a clean,
dry and well ventilated area. The air
compressor should be located at
least 12" away from the wall or other
obstructions
that will interfere with
the flow of air. The air compressor
pump and shroud are designed to
allow for proper cooling. The
ventilation openings on the
compressor
are necessary to
maintain proper operating
temperature.
Do not place rags or
other containers on or near these
openings. The air filter must be kept
clear of obstructions
which could
reduce air flow to the air compressor.
GROUNDING
iNSTRUCTiONS
RISK OF
--
ELECTRICAL
SHOCK.
in the event of a short
circuit,
grounding
reduces
the risk
of shock by providing an escape
wire for the electric
current.
This
air compressor
must be properly
grounded.
The portable air compressor
is
equipped with a cord having a
grounding wire with an appropriate
grounding
plug (see following
illustrations). The plug must be used
with an outlet that has been installed
and grounded in accordance
with all
local codes and ordinances.
must be installed and grounded in
accordance
with all local codes and
ordinances.
2.
Make sure the outlet being used
has the same configuration
as
the grounded plug. DO NOT
USE AN ADAPTER. See
illustration.
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
_g
[_Grounded
.
Pinl (_
Outlets
4.
If these grounding
instructions
are not completely
understood,
or if in doubt as to whether the
compressor
is properly
grounded, have the installation
checked by a qualified
electrician.
IMPROPER
--
GROUNDING
CAN
RESULT IN ELECTRICAL SHOCK.
Do not modify
the plug provided, if
it does not fit the available
outlet, a
correct
outlet should
be installed
by a qualified
electrician.
Repairs
to the cord set or plug MUST be
made by a qualified
electrician.
1.
The cord set and plug with this
unit contains a grounding
pin.
This plug MUST be used with a
grounded outlet.
11- ENG
D26015

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents