Creating Print Orders - Epson P-2000 User Manual

7
Press the button when you are ready to start
OK
printing.
During printing, the LCD is turned off. When you are
finished printing, make sure you disconnect the USB cable.

Creating Print Orders

A print order identifies images that you want to print, and
the number of copies of each image. You can create or
modify print orders at any time while using the P-2000.
Then you can print your images whenever it is convenient.
Note:
Print orders are saved even after turning turn off the P-2000.
1 Select an image in the thumbnails screen or in full
screen view.
2 Press the button to display the pop-up menu,
Menu
and select
Print Order
Saved Data / 2004.08.26
Copy to Album
Set as Folder Thumbnail
DSC00331.JPG Lock DSC00330.mpg
Start Slide Show
Copy to Memory Card
Print Order
Delete
DSC00327.JPG DSC00326.JPG
DSC00323.JPG DSC00322.JPG
by using the 4-way ring.
DSC00329.JPG DSC00328.JPG
DSC00325.JPG DSC00324.JPG
DSC00321.JPG
You see the print order screen:
Select Photos for print order
Press OK for the Print Settings screen
Note:
If you select the image in full screen view, the print order
screen looks different from the one above, but the
instructions are the same.
3 Press up or down on the 4-way ring to set the number of
prints you want for the selected image.
4 If you want to print another image in the folder or
album, use the 4-way ring to select it.
5 Repeat steps 3 and 4 until you set the quantities for all
the images you want to print. Then press the
button. You see the
print orders. The print order is saved until the image(s)
are printed.
To print the selected images you selected, follow the
instructions under "Printing Your Photos" on page 44.
Total Sheets 08
3
DSC00331. JPG
ON 2003.10.25
ON 640+480
OK
icon on the images that have
Direct Printing 46