Table of Contents
Advertisement
WARNING:Donotallowfamiliarity withtools
to makeyoucareless. Remember thata careless
fractionofa second issufficient t o inffictserious
injury.
WARNING:Always wearsafetygoggles or safety
glasses withsideshields whenoperating power
tools.Failure t o do socouldresult i nobjectsbeing
thrownintoyoureyesresulting in possible serious
injury,
WARNING:Donotuseanyattachments or acces-
sories not recommended bythe manufacturer of
thistoo!.Theuseofattachments o raccessories n ot
recommended canresult i nserious personal injury.
APPUCATIONS
You may use this tool for the purposes listed below:
[] Smooth, professional trimming of laminates
[] Cabinet making, trimming
counter tops and finishing
work
[] Trimming wood and plastics
TURNING
ON/OFF
THE TRmMMER
See Figure 4.
To turn the trimmer ON, slide the switch on top of the
trimmer to the ON position. Return the switch to the OFF
position when finished.
OFF
ON
HOW
TO OPERATE
THE TRIMMER
See Figure 5.
Before starting the trimmer, unplug it and make sure the cut-
ter is securely tightened in the collet and that the depth of
cut is properly set. Never start the trimmer while the cutter
is in contact with the workpiece.
After completing a cut, pull the cutter slightly away from the
cut surface. Turn the trimmer off and wait for the rotating
cutter to completely
stop before removing the base from
the work surface.
When cutting, fit the base of the trimmer over the work
surface and firmly hold the body of the trimmer with your
hand. Make sure the trimmer is running at full speed be-
fore contacting the workpiece.
WARNmNG:
Avoid hand positions that may expose
fingers to cutter through open areas of trimmer base.
Fingers entering the opening in the trimmer base can
be seriously cut or burned.
_
WARNmNG:
Never install a cutter larger than
1-!/8 in. in this trimmer. The use of larger bits can
result in loss of control and possible serious personal
injury,
Fig. 5
Fig. 4
11
Advertisement
Table of Contents
