More Features & Options; Grouping; Nicknames; Change Contact Information - DeWalt DS500 Instruction Manual

DS500 E,Sp 8/9/06 11:04 AM
2. Select Unit Settings from the MOBILELOCK
3. If you have more than one MOBILELOCK you will be asked to
select the correct one, the correct group or all.
4. Select Speaker Settings .
5. Select Paging .
6. If you have not located the MOBILELOCK
ate the paging again.
TO INITIATE PAGING VIA MOBILELOCK
1. Go online to www.dewalt.com/mobilelock and enter login and
password.
2. Select Unit Customization.
3. If you have more than one MOBILELOCK
asked to select the correct one.
4. Select Page.
5. If you have not located the MOBILELOCK
ate the paging again.
MORE FEATURES & OPTIONS
The MOBILELOCK TM unit has several customizable features. See
the MOBILELOCK TM website for up-to-date information about all of
the customizable features. Many of these features are prepro-
grammed to the most common settings. Before use, understand
the default settings.
NOTE: The MOBILELOCK
to change.

Grouping

To make for simple arming and disarming of several
MOBILELOCK TM units on several sites, group them together.

Nicknames

To avoid using the electronic serial number as the descriptor,
Page 15
TM menu.
TM unit, you can initi-
TM WEBSITE
TM unit, you will be
TM unit, you can initi-
TM website and phone menu is subject
nicknames can be used for both the MOBILELOCK
the phone menu system. Record the nicknames on the phone
menu system and that same recording will be used during alarm
notification.

Change Contact Information

The MOBILELOCK TM notification service will contact up to three
people in the event of an alarm. If the first person is not available
or chooses not to act upon the alarm (on vacation, etc) the notifica-
tion service will call the next user on the list. Low battery notifica-
tion and full battery notification will provide reminders of required
maintenance.

Change Password

The passwords for both the MOBILELOCK
menu system are the same. The password can be changed either
on the website or through the phone menu system.

Change Speaker Settings

There are several speaker settings. They are all user-adjustable.
The alarm siren can be silenced. The confirmation chirp on arming
and disarming can also be activated or silenced.

Battery Maintenance

DS500
The MOBILELOCK TM unit will not function without power. The unit
has a rechargeable battery. If the battery has not been adequately
charged, the product will not operate. Several factors such as
cellular signal strength, number of location requests, number of
alarms, and other activities affect the battery run-time.
For additional runtime, the DS505 Extended Run-Time Adapter can
be used.
15
TM website and
TM website and phone