Advertisement
4. Initial Operation
Starting the Floating
Before using the Floating Skimmer Set in the pond the air
Skimmer Set working:
d istributor air outlets
ties
must be fixed to the eyelets
3
1. P ut the Floating Skimmer Set into the pond and submerge it
until it is completely full of water.
2. U se the ties
the pond in the prevailing wind direction.
3. T o turn the pump on:
3
40 cm
Plug the pump plug into a mains socket.
Beware: The pump will start immediately.
4. T o turn the pump off:
Unplug the pump plug.
5. Putting into Storage
Storing /
Keep out of reach of children.
Overwintering:
1. T ake the Floating Skimmer Set out of the pond, clean it and
store in a dry place.
2. T o avoid difficulties when starting up in the spring it is
advisable to store the pump in a frost-free place in a water-
filled container.
The mains plug must not be submerged.
Disposal:
T he appliance must not be added to normal household waste but
(as per RL2002/96/EC)
must be disposed of properly.
v I mportant: Dispose of your unit at the municipal recycling
c ollection centre.
6. Maintenance
Cleaning the filter basket and
filter foam:
1. T ake the filter basket
5
housing.
2. Rinse the filter basket
6
3. P ut the filter basket
housing.
4. S tart the Floating Skimmer Set up again
(see 4. Initial Operation).
10
must be turned outwards and the
2
(see 3. Assembly).
4
to fix the Floating Skimmer Set to the edge of
3
DANGER ! Electric shock !
v U nplug the pump before any maintenance
work !
and the filter foam
out of the float
5
6
and filter foam
with clear water.
5
6
and filter foam
back into the float
5
6
7. Troubleshooting
Cleaning the Floating
Skimmer completely:
N o corrosive or abrasive cleaning materials must be used.
5
1. T ake the Floating Skimmer Set
out of the water.
6
2. T ake the filter basket
and the filter foam
of the float housing.
3. Remove the air distributor
4. P ush in the lugs
r emove the float housing
5. R emove the pump and the
0
unscrew the aeration pipe
8
6. R emove the aeration hose
from the aeration pipe
9
7. C lean all parts with clear water.
8. P ut the Floating Skimmer together again in the reverse order
(the lugs
W hen assembling the pump ensure that the connection cable
7
does not get crushed.
W hen fitting the aeration hose
7
properly to the aeration pipe
2
Cleaning the pump:
1. D ismantle the pump (see "Cleaning the Floating Skimmer
completely").
2. T urn the pump cover
from the motor housing
w
e
3. P ull the running unit
4. P ush the cleaned running unit
housing
q
5. P ush the pump cover
turn clockwise (bayonet connection).
6. P ut the pump back into the Floating Skimmer
(see "Cleaning the Floating Skimmer completely").
DANGER ! Electric shock !
v U nplug the pump before rectifying
problems!
5
out
6
.
2
and
7
.
8
.
9
0
.
9
must click into place).
7
ensure that it is connected
0
and is not kinked.
9
anti-clockwise and remove vertically
q
(bayonet connection).
w
out of the motor housing
and clean it.
e
w
back into the motor
e
.
w
vertically into the motor housing
q
9
2
and
w
11
Advertisement
