Function - Gardena 7940 Operating Instructions Manual

3. Function

!
Suction unit (grey)
"
Pump
§
Motive water hose (red)
$
$
Nozzle housing
%
Filter trough
&
Dirty water float hose
(transparent)
/
Adapter nozzles
– for cleaning surfaces
– for narrow places
(
Collecting basket
)
Filter sieves
=
combisystem handle
a
Collecting bag
Note :
12
!
%
$
" §
"
The pump draws in the pond water via the suction unit
pumps it via the motive water hose
$
ing into the filter trough
through the nozzle housing
&
hose .
The dirty water is sucked up with the adapter nozzles
pumped via the dirty water hose
)
the filter sieves and collecting basket
The dirt is then filtered out of the water.
(The cleaned water is not drinking water.)
The cleaned water is returned directly to the pond so that you
do not loose any pond water. The biological balance of the pond
is therefore maintained.
The slow suction speed not only ensures optimum cleaning
results, but also ensures that flora and fauna in the pond remain
unharmed, and prevents stones and plants from being drawn
into the Silt Remover by accident.
The water that is returned to the pond contains (biologically active)
floating particles. The cloudy appearance of your pond caused by
these particles may last for several days.
If you accidentally suck up small creatures into the Pond Silt
Remover (e.g. water snails, beetles) you can remove them from
the open collecting basket
You can then dispose of the dirt and silt on your compost heap
or with other garden refuse.
=
(
)
&
§
through the nozzle hous-
%
. The jet of motive water streaming
$
creates a vacuum in the dirty water
&
and nozzle housing
(
or collecting bag
(
and return them to the pond.
/
a
!
and
/
and
$
onto
a
.