Craftsman SEARS 113.170370 Owner's Manual page 12

Operation (continued)
Moving the Vac
Should it become necessary to pick the
vac up to move it, the handles may be
used on the sides of the dust drum. Do
not use the handle located on the detach-
able blower to pick up the entire wet/dry
vac or the lid assembly.
Handle
/
Handle
Blowing Feature
Your wet/dry vac features a "detachable
blower". It has the capability to be used as
a dedicated blower for yard work, patio
cleanup and workshop applications to
blow sawdust and other debris.
WARNING: Always wear safety gog-
gles complying with ANSI Z87.1
when using as a blower,
WARNING: Wear a dust mask if
blowing creates dust which might be
inhaled,
CAUTION: To reduce the risk of hear-
ing damage wear ear protectors
when using the vac/blower for
extended hours or when using it in a
noisy area.
WARNING: To reduce the risk of
injury to bystanders, keep them clear
of bow ng debr s.
1. Familiarize yourself with the detachable
blower portion of your wet/dry vae.
2. Remove the detachable blower of your
vac by pressing down on the latch
under the handle of the detachable
blower. This latch holds the detachable
blower to the lid assembly.
3. Lift the detachable blower up by raising
the handle upward and pulling the unit
away from the nested position of the
hinges.
Assemble the Detachable Blower for "Blowing"
This may be assembled two ways.
1. Insert the small end of one of the exten-
sion wands into the blowing port of the
detachable blower. Insert the blowing
adapter into the extension wand and
install the blower nozzle onto the blow-
ing adapter.
-OR-
2. Insert the blowing adapter into the
blowing port of the detachable blower.
Connect the large end of the extension
wand to the blowing adapter. Connect
the blower nozzle to the extension
wand.
Blowing Port
Extension
Wand
Blowim Blower
Adapter Nozzle
3. Turn the blower "ON" by toggling the
switch in the handle of the blower to the
"ON" position.
12