Chain Saw Components; Safety Features - Craftsman 316.350220 Operator's Manual

17
22
24
15
13 14
24
24
23 8
10
11
15
CHAIN SAW COMPONENTS
1. GUIDE BAR
2. SAW CHAIN
3. SAW CHAIN ADJUSTMENT SCREW
4, SPARK ARRESTER SCREEN
5. CHAIN BRAKE ®LEVER/HAND GUARD
6, FRONT HANDLE
7. STARTER HANDLE
8, SPARK PLUG
9. AIR CLEANER COVER
10. STOP SWITCH
11. SAFETY TRIGGER
12, BAR OIL RESEVOIR CAP
13, STARTER COVER
14. FUELTANK CAP
15. REAR HANDLE/BOOT LOOP
16. THROTTLE LATCH
17, RED CHOKE LEVER
18. BAR RETAINING NUTS
I9. THROTTLE / TRIGGER
20. CHAIN CATCHER
2l. CHAIN BRAKE ®COVER
22. MULTI-PURPOSE TOOL
23. CARRY CASE
24. VIBRATION MOUNTS
7
SAFETY FEATURES
2. LOW KICKBACK SAW CHAIN helps significantly
reduce kickback, or the intensity of kickback, due to
specially designed depth gauges and guard links.
3. SAW CHAIN ADJUSTMENT SCREW It is normal for a
new chain saw chain to stretch after the first 30 min-
utes of use. Check the tension of the chain
regularly to ensure the best performance, see SAW
CHAIN ADJUSTMENT under MAINTENANCE AND
REPAIR INSTRUCTIONS,
5. CHAIN BRAKE ® LEVER / HAND GUARD protects the
operator's left hand in the event it slips off the front
handle while saw is running,
CHAIN BRAKE ®is a safety feature designed to
reduce the possibility of injury due to kickback by
stopping a moving saw chain in milliseconds,
It is activated by the CHAIN BRAKE ® lever
10. STOP SWITCH immediately stops the engine when
pushed up. Stop switch must be pushed down to
start or restart engine.
11. SAFETY TRIGGER prevents accidental acceleration
of the engine, Throttle trigger (19) cannot be
squeezed unless the safety trigger is depressed.
17. RED CHOKE LEVER aids in starting the engine.
19, THROTTLE TRIGGER controls engine speed.
20. CHA1N CATCHER reduces the danger of injury in
the event saw chain breaks or derails during
operation. The chain catcher is designed to
intercept a broken and whipping chain,