Regulatory Information - Oki B710dn Material Safety Data Sheet

Regulatory Information

ENERGY STAR
As an ENERGY STAR Partner, Oki Data
has determined that these printers meet
the ENERGY STAR guidelines for energy
efficiency. Look for the ENERGY STAR
logo on your printer.
Year 2000 Compliance
This product is Year 2000 Compliant. It contains information
technology that accurately processes date and time data
between the years 1999 and 2000, and carries no issue for
the September 9, 1999 (9999) programming concern. This
product, when used in combination with products purchased
from other manufacturers, whose products properly
exchange data and time information, will accurately process
the date and time.
Laser Safety Compliance
Class 1 Laser Device and CDRH Compliance
This printer is certified as a Class 1 laser product under the
U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation
Control for Health and Safety Act of 1968. This certification
indicates that the printer does not emit hazardous laser
radiation. Since radiation emitted inside the printer is
completely confined within the protective housings and
external covers, the laser beam cannot escape from the
machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of
the U.S. Food and Drug Administration implemented
regulations for laser products on August 1976. These
regulations apply to laser products marketed in the United
States. The label on the printer indicates compliance with
the CDRH regulations and must be attached to laser
products marketed in the United States.
Federal Communications Commission (FCC)
Declaration of Conformity
1. Product Identification
Product Name
B710, 120V
B720, 120V
B720, 220V
B730, 120V
B730, 220V
Second Paper Tray
Duplexer
Offset Catch Tray
2. Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
®
Model Name
JEA-11
JEA-12
JEB-12
JEA-13
JEB-13
JEA-7
JEA-81
JEA-51
6 - English
1-800-654-3282 (1-800-OKI-DATA)
FCC Radio Frequency Interference
Statement
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Plug the unit into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Note: It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC regulations.
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
Industry Canada (IC)
Radio Interference Statement
This Oki Data apparatus complies with the Class B limits for
radio interference as specified in the IC Radio Interference
Regulations.
European Union Council of the European
Communities
Statement of Electromagnetic Conformance
This product complies with the requirements of the council
Directive 89/336/EEC on the approximation of the laws of
the member states relating to electromagnetic compatibility.
Statement of Safety Conformance
This product is in conformity with Directive 73/23/EEC on
the harmonization of the laws of Member States relating to
electrical equipment designed for use within certain voltage
limits.