Maintaining Your All-In-One; Checking The Print Head Nozzles - Epson Stylus CX8400 Series Quick Manual

Maintaining Your All-in-One

Follow the instructions in this chapter for checking and cleaning the print head
nozzles and replacing ink cartridges. To align the print head, if necessary, see your
on-screen User's Guide.

Checking the Print Head Nozzles

If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles.
1. Load letter-size paper in the sheet feeder.
2. Press
Setup
3. Press l or r to select
then press
4. Select
Nozzle Check
5. Press x
6. Check the nozzle check pattern that prints to see if there are gaps in the lines.
7. If there are no gaps, press
If there are gaps or the pattern is faint, press x
(see page 31).
30
Maintaining Your All-in-One
.
Maintenance
.
OK
and press
.
Start
Nozzles are clean
,
.
OK
.
OK
Nozzles need cleaning
to clean the print head
Start