Epson Stylus CX4200 Series Quick Manual page 37

Copy window
Light: status status
Error: Flashing 1
b
Memory Card
(all 3 lights):
Flashing
(Epson Stylus
CX4800 Series
only)
Error: Flashing 2
b
Print From
Index Sheet:
Flashing
(Epson Stylus
CX4800 Series
3
only)
4
Error: Flashing H
b
fast
Error: On E
b
B Ink: On
All other lights:
Flashing
All lights: E
Flashing
Cause
A memory card is
inserted that is not
supported by the
Epson Stylus CX4800
Series.
The inserted memory
card does not contain
any valid images.
An index sheet was
not recognized
because it is not
positioned correctly.
The index sheet is
marked incorrectly.
(No marks are
detected or the sheet
includes more than
one mark for an
image.)
The index sheet does
not match the photos
on the memory card.
The paper thickness
lever is set to the
^
H position.
An Epson Stylus CX
part needs to be
replaced.
There is a problem
with the Epson Stylus
CX.
Solution
Remove the incompatible
memory card; see page 12.
See page 12 for a list of
compatible card and image
types.
Position the index sheet correctly
on the glass, aligning the top of it
with the left edge of the glass.
Then press x Start Color to
continue or y Stop to cancel.
Remove the index sheet, mark it
correctly, and try again; see
page 15.
Remove the memory card and
insert the card used to print the
index sheet (see page 13 for
instructions)—or place the
correct index sheet on the glass.
Then press x Start Color to
continue or y Stop to cancel.
If you have set the lever to the
^
H position because you are
printing envelopes, press
x Start Color to continue.
Otherwise, set the lever to the
m
L position.
Contact your local authorized
servicer or contact Epson for a
referral; see page 40.
Turn the Epson Stylus CX off and
then back on. If the error does
not clear, contact your local
authorized servicer or contact
Epson for a referral; see page 40.
Solving Problems
37