Epson Stylus CX4200 Series Quick Manual page 10

Making 10 or More Copies
1. Make sure the Epson Stylus CX is turned on.
2. Place the photo on the glass as described on page 6. Be sure to close the
document cover.
3. Press the
Epson Stylus CX to print up to 100 copies.
4. Load enough paper for the number of copies (up to 100) you want to make.
For example, to print 12 copies, load 12 sheets of paper.
5. Press the paper type button to select
6. Press the paper size button to select
7. Press the x
The Epson Stylus CX makes copies until it runs out of paper. Then the red
Error
b
8. To make more copies, load more paper and press the x
Start B&W
x
If you don't need any more copies, press the y
Note:
When making a lot of copies, it is a good idea to remove the printed copies from the
output tray after every 10 sheets or so.
Speeding Up Printing
If you want to make a copy quickly and do not need high quality, you can print a
"draft" copy. The print quality is reduced, but the copy is printed faster.
1. Load plain, letter-size paper and select
control panel.
2. When you are ready to copy, press and hold down the y
press the x
button (to copy in black and white). When the P
release both buttons.
10
Copying a Photo or Document
button until you see "
Copy
or x
Start Color
light comes on.
button to resume.
button (to copy in color) or the x
Start Color
–
" in the
Copy
Plain Paper
,
Letter 4"x 6"
button.
Start B&W
Stop
Plain Paper
window. This tells the
or .
Photo Paper
, or .
5"x 7"
Start Color
button.
and size on the
Letter
button, then
Stop
Start B&W
light starts flashing,
On
or