Table of Contents
Advertisement
100
ThinkPad X100e Hardware Maintenance Manual
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, you need to apply the following labels:
2
Homologation label
3
FFC label
5
Certified label under battery
6
Serial number barcode blank label
9
Information label under door
10
SIM information label under door
Following labels need to be peeled off from the old base cover, and need to be
put on the new base cover.
1
Windows license label (COA) (only for Windows 7 models)
4
Ethernet label
7
Wireless WAN label
8
China Wireless WAN label
For some models, you also need to apply one or two FCC labels. Check the old
base cover; if it has one or two FCC labels, find duplicates of them in the label
kit and apply them to the new base cover.
For the location of each label, refer the following figure:
1
2
3
10
9
4
5
6
7
8
Advertisement
Table of Contents
