Replacing The Display Bezel; Removing The Display Panel - Dell Vostro 1400 Service Manual

Replacing the Display Bezel
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as the back panel on the computer.
1. Follow the instructions in Before You
2. Follow the instructions in Removing the Display
3. Starting near the hinges (near the Dell logo), use your fingers to snap the new bezel into place.
4. Replace the six M2.5 x 5-mm screws to secure the bezel.
5. Replace the six rubber bumpers to cover the screws.
6. Replace the display assembly (see
Removing the Display Panel
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as the back panel on the computer.
1. Follow the instructions in Before You
2. Remove display assembly (see
3. Remove the display bezel (see
1 screws (2) 2
4. Remove the two screws securing the display panel to the display cover.
Begin.
Assembly.
Replacing the Display Assembly).
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
display panel 3 display cover