Dell Vostro 1400 Service Manual page 38

Service manual
Hide thumbs Also See for Vostro 1400:
Table of Contents

Advertisement

 
3. Align the new palm rest with the base of the computer, and then snap the palm rest into place.
 
NOTICE:
To prevent damage to the cables or the cable connectors, ensure that the locking clips on both sides of each system board connector are
firmly seated and the cables are secure.
 
4. Connect the touch pad cable to the system board.
 
5. Connect the LED board cable to the system board.
 
6. Replace the three M2.5 x 5mm screws to the locations marked by letter P on top of the palmrest.
 
7. Turn the computer over and replace all the screws (22) in the bottom of the computer to secure the palm rest including the three screws in the battery
bay.
 
8. Replace the display assembly (see
 
9. Replace the keyboard (see
 
10. Replace the keyboard cover (see
 
11. Replace the optical drive (see
Back to Contents Page
 
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Keyboard
Cover).
Replacing the Optical
Drive).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 1420

Table of Contents