Camera Settings; Remote Live View Window Functions; Focusing Manually - Canon EOS-1D Mark IV Instruction Manual

You cannot operate the camera when the [Remote Live View
window] is displayed. Pressing the camera's < SET > button (Live
View shooting button on
5D Mk II
) will also display the Live View image on the camera's
500D
LCD monitor, allowing you to view the image while controlling the
camera.
On
5D Mk II 7D 50D REBELT1i
is on the capture window's button, the shooting mode will not
change even if you operate the camera's Mode dial.
You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
To perform exposure simulation (p.34)
window] or enable display of histograms (p.69), set your camera's
Custom Function [Live View exposure simulation] to [Enable]. On
1D Mk IV 5D Mk II 7D 50D
the menu to [Enable].
On
1D Mk IV 5D Mk II 7D 50D
lockup with remote shooting (You cannot take test shots after
setting mirror lockup.). On
1D Mk IV
single shooting.
With , mirror lockup and silent single shooting
1Ds Mk III 1D Mk III
cannot be performed in remote shooting.
The [Test Shooting] window appears when you click the [Test
shooting] button.
During flash shooting, you can take a test shot under the same
conditions as an actual shot, and adjust the white balance based
on the shot test image (p.35).
You can save shot images to both your computer and a memory
card by checkmarking [Save also on the camera's memory card]
in preferences ([Remote Shooting] window) (p.53).
You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to ImageBrowser or other software in preferences ([Linked
Software] window) (p.53).
For a list of the [Remote Live View window] functions, refer to
p.69.
For a list of the [Zoom View] Window functions, refer to p.70.
7D
50D REBELT1i
, when the cursor
500D
with [Remote Live View
, set [Exposure simulation] in
, you can also use mirror
, you can also use silent

Remote Live View Window Functions

These pages explain the functions available in the [Remote Live View
window], including checking the camera settings and focusing while
viewing your subject on the computer screen.

Focusing Manually

You can focus manually while viewing the enlarged image in the
[Remote Live View window].
1 Set the lens's focus mode switch to < AF >.
2 Drag [ ] to the section you want to enlarge.
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Drag
Reference
Index
30