Setting Jpeg Quality And Applying To The Camera - Canon EOS-1D Mark IV Instruction Manual

3 Open the folder containing the saved white balance
file, select the file and then click the [Open] button.
The white balance file is loaded.
The white balance files that you can register to the camera are
files with the ".WBD" extension.
4
Enter a title into the [Title] input field.
You cannot enter the title on
5
Click the [Apply to camera] button.
The personal white balance is registered on the camera.
This is registered as manual white balance on
To register another setting, repeat step 2 to step 5.
6
Click the [Close] button.
The [Personal white balance settings] dialog box closes and the
display returns to the [Shooting menu].
7
Select a registered personal white balance on the
camera.
Select a registered personal white balance (
) or manual white balance (
1D Mk III
balance.
For selecting personal white balance or manual white balance,
refer to "Selecting the White Balance" (
) or "Setting the White Balance" (
1D Mk III
camera's Instruction Manual provided with your camera.
.
40D
40D .
1D Mk IV 1Ds Mk III
) as the white
40D
1D Mk IV 1Ds Mk III
) in the
40D

Setting JPEG Quality and Applying to the Camera

1D Mk IV 1Ds Mk III 1D Mk III
You can set the JPEG image quality and apply it to the camera, in the
same way as operating from the camera.
1
Click [JPEG quality].
The [JPEG Quality] window appears.
2 Click the setting position.
The settings are applied to the camera.
Higher values give a lower compression ratio and higher image
quality for any size.
3 Click [Return].
The display returns to the [Shooting menu].
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
21 21