Table of Contents
Advertisement
Your sander is suitable for sanding with coarse, medium,
and fine grit sandpaper. It will produce a fine scratch free
finish when used to sand with the grain on wood surfaces.
By purchasing optional accessories, it can also be used as
a polisher or scraper.
Before attempting
to use your sander, familiarize
yourself
with all operating
features
and safety
requirements.
DOUBLE
INSULATION
Double insulation is a concept in safety, in electric power
tools, which eliminates the need for the usual three-wire
grounded power cord. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need
to be grounded.
IMPORTANT
Servicing of a tool with double insulation requires extreme
care and knowledge of the system and should be
performed only by a qualified service technician.
For
service we suggest you return the tool to your nearest
Sears Store for repair. Always use original factory
replacement parts when servicing.
ELECTRICAL
CONNECTION
Your sander has a precision built electric motor. It should
be connected to a power supply that is 120 volts, 60 Hz,
AC only (normal household
current).
Do not operate
this tool on direct current (DC). A substantial voltage drop
will cause a loss of power and the motor will overheat.
If
your tool does not operate when plugged into an outlet,
double-check the power supply.
_
WARNING:
The double insulated system is
intended to protect the user from shock resulting
from a break in the tool's internal wiring. Observe all
normal safety precautions
related to avoiding
electrical shock.
OSCILLATING
MOTION
The oscillating motion sands 3.0 mm arcs, providing fast
cutting action with excellent sanding results. As the name
implies, this tool has been designed primarily for detailed
and intricate sanding. For example, refinishing furniture,
chairs, etc., enabling you to sand in places that are hard to
get to.
SWITCH
This tool is equipped with a simple switch control. To turn
your sander ON, depress the switch button as shown in
Figure 1. Depress the switch button in the opposite
direction to turn your sander OFF.
PRODUCT
SPECIFICATIONS
Sanding pad ...........................................
Triangle shaped
No load speed ...............................................
12,000 spm
Motion ............................................................
Oscillating
Rating ..............................................
120 volts, 60 Hz, AC
Input ..............................................................
30 amperes
Paper type .............. Pressure sensitive adhesive backed
Arc size .......................................................
3.0 mm at tip
TO TURNON
SWITCH
BUTTON
RUBBERPAD
PRESSURE SENSITIVE
ADHESIVEBACKEDSANDPAPER
TO TURN OFF
Fig. 1
Advertisement
Table of Contents
