Honda Pilot Owner's Manual page 492

Lights
BULB
CONNECTOR
2. Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
3. Remove the bulb by turning it
about one-quarter turn
counterclockwise.
488
BULB
CONNECTOR
4. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
5. Push the electrical connector onto
the new bulb.
6. Turn on the headlights to test the
new bulb.
2009 Pilot
Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs
FRONT TURN SIGNAL/PARKING LIGHT
SOCKET
1. Open the hood.
2. Remove the socket by turning it
one-quarter turn counterclockwise.
3. Pull the bulb straight out of its
socket.
BULB