With A Lap/Shoulder Belt - Honda Pilot Owner's Manual

Hide thumbs Also See for Pilot:

Table of Contents

Installing a Child Seat with a Lap/

Shoulder Belt

When not using the LATCH system,

all child seats must be secured to the

vehicle with the lap part of a lap/

shoulder belt.

In addition, the lap/shoulder belts in

all seating positions except the

driver's have a lockable retractor

that must be activated to secure a

If you intend to install a child seat in

the center seating position of the

second row or in the third row, make

sure the detachable seat belt is

securely latched (see page

With the child seat in the desired

seating position, route the belt

through the child seat according

to the seat maker's instructions,

then insert the latch plate into the

Installing a Child Seat

To activate the lockable retractor,

slowly pull the shoulder part of the

belt all the way out until it stops,

then let the belt feed back into the

After the belt has retracted, tug on

it. If the belt is locked, you will not

be able to pull it out. If you can pull

the belt out, it is not locked, and

you will need to repeat these steps.

Chapters

Table of Contents