Controls and Features
Tempered glass shelves in the beverage
center unit are removable for easg cleaning
or for storing larger items.
To remove a shelf, open the door
to avoid potential
the gasket. Lift up on the back of the shelf
slightlg. Tilt the shelf to one side at an angle
while pulling forward.
To replace a shelf, open the door
to avoid potential damage
to the gasket. Tilt the shelf to one side at
an angle and slide toward the back wall,
placing one side onto the shelf support.
Place the other side onto the opposite
Ensure rear locking tabs are
engaged. When installed properlg, the shelf
will not slide forward
when gentlg pulled.
To remove, lift up on the back of the
Tilt the shelf at an angle while removing
Place in slots when replacing the shelf
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
Step 1: Lift the back edge of the front half of
Step 2: Pull slightlg forward.
Step 3: Lower the back edge of the front half
of the shelf while sliding it underneath
The entire Quick Space shelf can be removed
and replaced (see Glass Shelves section).